Harti RNS 315

Scrie răspuns
Lostboy
Mesaje: 93
Membru din: Lun Dec 26, 2016 9:08 pm
Has thanked: 35 ori
Been thanked: 9 ori

#391

Lun Mai 15, 2017 9:53 am

liviulucian scrie:
Lostboy scrie:
clouseau scrie:
40F1E89E22763F88F9E7DB58BC5CD8DD

Thank you very much clouseau!


Academiciene ce mai zici ?!? ... ai ajuns cu cersitu pe aici in limbi straine ?
Te bagi si la RNS 310 si 315 ... esti dornic sa inveti, ca sa poti ajuta colegii de forum ?!!

In alta ordine de idei, daca e cineva interesat, am sa transmit o metoda (cunosc 2 metode - dar una este mai simpla) de aflare a parolei in functie de cid, cu conditia ca oricine de pe acest forum, va avea nevoie de pasw, sa fie ajutat .
Trebuie sa cunoasca putina electronica si sa detina un rns315 .

PS. Am fost plecat cateva saptamani si am avut nevoie de 3 pasw, pe care dl clouseau, (care m-a rugat sa nu fac publica metoda) a ezitat sa mi le trimita.

Ce să mai zic?
Ce treabă are una cu alta?
Dacă asta e nivelul la care ești dispus să cobori, asta este. NU am ce să-ți fac.
Eu mă gândeam că ”ataci” o idee sau ceva ce am spus și nu a fost corect.
Dar în cazul de față cu apelative și având în vedere că nu ai fost ajutat, eu mă declar învins.
Mă așteptam la mai mult de la tine, dar deh .... asta este. Atât poți.
dacia1300
Mesaje: 4
Membru din: Mie Apr 26, 2017 12:52 pm

#392

Lun Mai 15, 2017 9:10 pm

floriancj scrie:
Bogdan074 scrie:Am găsit un Ubuntu modificat ISO care vă permite să DEBLOCAȚI și ȘTERGE cardul SD.
https://mega.nz/#!YR42FKZQ!XtqFC6MuO7O_3x2kNfm7qghoOP1Y-xQqSXTUftmbZgE

După utilizarea acestor comenzi puteți formata cardul SD în Windows.
sudo -s
echo erase> /sys/bus/mmc/devices/mmc0*/lock


Formatarea unui card blocat functioneaza doar pt. carduri Samsung Evo+?!?

Am un card SanDisk pe care l-am blocat cu o parola (cu mmc64 lock_sd ...). Vreau acuma sa-l formatez, sa-l folosesc la altceva; dupa comenzile de mai sus imi da: bash: echo: write error: Connection timed out. Windows 10 imi vede card-ul ca fiind blocat, nu pot sa-i fac nimic...

Imi scapa ceva? Mai pot recupera cardul?


Incearca intr-un telefon cu Android generatie mai nou, eu am reusit sa deblochez cardurile blocate pt RNS315 folosind un telefon Honor 8 (Huawei). Are la Settings>Advanced Settings>Unlock SD by force, merge cu orice card blocat - bineinteles pe langa blocat il si formateaza.
Avatar utilizator
clouseau
Mesaje: 88
Membru din: Vin Dec 30, 2016 7:32 am
Has thanked: 1 data
Been thanked: 16 ori
Contact:

#393

Lun Mai 15, 2017 9:54 pm

ungureanu.manuel scrie:Hi @clouseau, can you please provide me the password for 28424520202020200200333db9010301?

Thank you!
Manuel


B7AF5B5484B4496554DCB2D12F205E40
Avatar utilizator
clouseau
Mesaje: 88
Membru din: Vin Dec 30, 2016 7:32 am
Has thanked: 1 data
Been thanked: 16 ori
Contact:

#394

Lun Mai 15, 2017 9:55 pm

ubernetok scrie:Hello @clouseau, would be so kind to help me with the password for CID 02544d534130344711228237b200e100 ? Thank you so much


73F758996FB33322F10153C9636D74B7
Avatar utilizator
clouseau
Mesaje: 88
Membru din: Vin Dec 30, 2016 7:32 am
Has thanked: 1 data
Been thanked: 16 ori
Contact:

#395

Lun Mai 15, 2017 9:56 pm

stoicacristina scrie:Hello clouseau!

Could you please give me the password for the CID: 275048534438474230da9854b700f401?

Thank you!
Have a nice day!


31D963019FC3581CFEF2EFE374BC45EF
ungureanu.manuel
Mesaje: 5
Membru din: Mie Mai 10, 2017 10:55 am

#396

Mar Mai 16, 2017 5:47 pm

clouseau scrie:
ungureanu.manuel scrie:Hi @clouseau, can you please provide me the password for 28424520202020200200333db9010301?

Thank you!
Manuel


B7AF5B5484B4496554DCB2D12F205E40



Thank you very much Clouseau!

I made the card but when I plug it into navigation it says "Error: SD card"
1. I formated the card FAT32 with diskpart;
2. I copied the navpsf_update.7z onto the card ( i even deleted from linux the "System volume information" folder that windows created)
I've try both with and without this folder;
3. I used Ubuntu posted on this forum booted from a USB device;
4. I copied MMC on the linux desktop, and gave the proper rights (chmod 777 mmc64) ;
5. I inserted the SD card and with the "df" command from terminal, the SD card appeared "/dev/mmcblk0p1";
6. I ran "cat /sys/block/mmcblk0/device/cid" and get the CID 28424520202020200200333db9010301;
7. I tried to change the CID, although it returns a positive answer ( Succes! Remove and reinsert SD card to check new CID) when i reinsert the card the CID remains the same, unchanged.
8. I tried setting the password that Clouseau gave me using : "sudo ./mmc64 lock_sd /dev/mmcblk0 B7AF5B5484B4496554DCB2D12F205E40". It returns " ioctl: Connection timed out. Could not read response to SEND_STATUS from /dev/mmcblk0 ". After that windows doesn't recognize the SD card, and plugged into a Symbian Nokia phone demands password, so i think the card is locked.
9. When I inserted the SD into RNS it says "Error: SD card".
Anyone with any ideea about what could be the problem?

Thank you!
Avatar utilizator
clouseau
Mesaje: 88
Membru din: Vin Dec 30, 2016 7:32 am
Has thanked: 1 data
Been thanked: 16 ori
Contact:

#397

Mar Mai 16, 2017 6:48 pm

You must unpack navpsf_update.7z :-)

Here is my guide how to prepare card for RNS315 :
for you is interesting 2 - 7 and from 9


1 - Card EVO/EVO+ (I tried 32G and 64G SD)
2 - Format card in Windows (by Guiformat.exe utility) and copy navpsf_update on card . Nothing more!
3 - Start Laptop from boot flash Ubuntu (previously created in PC by LiLi USB Creator)
4 - Copy file mmc and mmc32 to Desktop
5 - Right cick -> open terminal, then go to the Desktop folder ( by command "cd Desktop" )
6 - Make command execution rights by command "chmod 777 mmc32" and "chmod 777 mmc"
7 - Insert the SD in slot. Terminal command "df" and verify the name card.

Somewhere down everything must occur "mmcblk0" + p + a number.
The suffix p "number" is the partition on the card, we are not interested, just use "mmcblk0".
When you do not see anywhere mmcblk0,
you must try different Laptop with on matherboard integrated cardreader.

Now you can read the original CID by command "cat / sys / block / mmcblk0 / device / cid"

8 - change CID by terminal command:
"sudo ./mmc32 prog_cid / dev / mmcblk0 5d53424c32424d31013917ca53010400"
or
"sudo ./mmc prog_cid / dev / mmcblk0 5d53424c32424d31013917ca53010400"

Writing new CID: 5d53424c32424d31013917ca53010400
Success! Remove and Reinsert SD card to check new CID.

If you do not see messages about success, remove and reinsert SD card
and check CID by command "cat /sys/block/mmcblk0/device/cid"

Now will be displaying the new CID 5d53424c32424d31013917ca53010400
You should see 5d53424c32424d31013917ca53010401 line.
The last two characters may be different, for example, be 69.
If CID changed besides the last two numbers, so it's okay.
On the last two numbers does not matter,
it's just a checksum, which generates SD card itself.

If the CID unchanged try again command for changing, remove and reinsert SD card
and check CID by command "cat /sys/block/mmcblk0/device/cid"

If not change, try the same command, but with different bit version of mmc,
remove and reinsert SD card
and check CID by command "cat /sys/block/mmcblk0/device/cid"

If not change, you must use a different EVO
or contact me by email : rns315@volny.cz or skype : clouseau22
I can make appropriate password to your "bad" card.
With password from me you can use this card as "good" EVO card.
Also you can use any cheap, unbranded card 4G for East, 8G for West.

9 - Locking using passwords

For the RNS315, you must to lock the card by appropriate password.
Double-check that you have the correct folder on the card and all data inside. Nothing else!
It's not possible to unlock easy again !!!

Lock command :
"sudo ./mmc lock_sd /dev/mmcblk0 C99A20843ED7D90B6801E49F2BC80277"
or
"sudo ./mmc32 lock_sd /dev/mmcblk0 C99A20843ED7D90B6801E49F2BC80277"

Ignores the error messages if they are some, especially this:

"ioctl: Connection timed out - Could not read response to SEND_STATUS from /dev/mmcblk0"
Do not be disappointed - everything is alright!

"ioctl: Connection timed out" - It is a proper report from the system
- when you lock the card, it is immediately invisible to the system
and system report, that can not connect to SD card !

"Could not read response to SEND_STATUS from /dev/mmcblk0"
- also right - system could not read response on query on the status from SD card.

Remove and reinsert SD card to check lock - when system not recognize, so its locked.
Try in a car.
Avatar utilizator
clouseau
Mesaje: 88
Membru din: Vin Dec 30, 2016 7:32 am
Has thanked: 1 data
Been thanked: 16 ori
Contact:

#398

Mar Mai 16, 2017 8:19 pm

darkwave55 scrie:Hello,

Can someone provide a password for CID 1b534d4542324d5730ca455dfa011200. I have a samsung evo+, 32g card but I get the following error:

root@ubuntu:~/Desktop/VW# sudo ./mmc64 prog_cid /dev/mmcblk0 5d53424c32424d31013917ca53010400
Writing new CID.
ioctl: Invalid or incomplete multibyte or wide character

Thank you


E7B5819F4FE3C5DC046E1FE06AA51D52
Avatar utilizator
clouseau
Mesaje: 88
Membru din: Vin Dec 30, 2016 7:32 am
Has thanked: 1 data
Been thanked: 16 ori
Contact:

#399

Mar Mai 16, 2017 8:20 pm

cabassergiu scrie:Hi clouseau!

Could you please give me the password for the CID: 1b534d4542324d5730e48d57d9011200? I have a samsung evo+, 32g and I get the following error:
ioctl: Invalid or incomplete multibyte or wide character

Thank you!
Sergiu


D6EB216069D711A2EC1971CF0784AD3C
cabassergiu
Mesaje: 2
Membru din: Mar Mai 09, 2017 4:35 pm

#400

Mie Mai 17, 2017 5:26 am

clouseau scrie:
cabassergiu scrie:Hi clouseau!

Could you please give me the password for the CID: 1b534d4542324d5730e48d57d9011200? I have a samsung evo+, 32g and I get the following error:
ioctl: Invalid or incomplete multibyte or wide character

Thank you!
Sergiu


D6EB216069D711A2EC1971CF0784AD3C
clouseau scrie:
cabassergiu scrie:Hi clouseau!

Could you please give me the password for the CID: 1b534d4542324d5730e48d57d9011200? I have a samsung evo+, 32g and I get the following error:
ioctl: Invalid or incomplete multibyte or wide character

Thank you!
Sergiu


D6EB216069D711A2EC1971CF0784AD3C

Multumesc! Thank you! Clouseau
marcu danut
Mesaje: 41
Membru din: Mie Mai 17, 2017 9:23 am
Has thanked: 1 data
Been thanked: 10 ori

#401

Mie Mai 17, 2017 9:26 am

mrs. clouseau,

Can you give me the password for this CID 744a455344553120020033540a000700 , please?

Thank you
Avatar utilizator
clouseau
Mesaje: 88
Membru din: Vin Dec 30, 2016 7:32 am
Has thanked: 1 data
Been thanked: 16 ori
Contact:

#402

Mie Mai 17, 2017 2:13 pm

marcu danut scrie:mrs. clouseau,

Can you give me the password for this CID 744a455344553120020033540a000700 , please?

Thank you


475EBB18816090F64F0274D4526B322B
Avatar utilizator
clouseau
Mesaje: 88
Membru din: Vin Dec 30, 2016 7:32 am
Has thanked: 1 data
Been thanked: 16 ori
Contact:

#403

Mie Mai 17, 2017 2:14 pm

Now I need little bit rest...thanks :-)
darkwave55
Mesaje: 2
Membru din: Dum Mai 14, 2017 9:01 am

#404

Mie Mai 17, 2017 7:54 pm

clouseau scrie:
darkwave55 scrie:Hello,

Can someone provide a password for CID 1b534d4542324d5730ca455dfa011200. I have a samsung evo+, 32g card but I get the following error:

root@ubuntu:~/Desktop/VW# sudo ./mmc64 prog_cid /dev/mmcblk0 5d53424c32424d31013917ca53010400
Writing new CID.
ioctl: Invalid or incomplete multibyte or wide character

Thank you


E7B5819F4FE3C5DC046E1FE06AA51D52


Thank you!!
misdervesa
Mesaje: 3
Membru din: Mie Mai 17, 2017 8:04 pm

#405

Mie Mai 17, 2017 8:08 pm

Hello clouseau, only when you have the time and if you don't mind, maybe you can generate a password for me too. I tried to find an old Samsung card which returns CID change ok, but it's still the same. Thank you

CID: 1b534d30303030301059b928a500ea00
Scrie răspuns

Înapoi la “Volkswagen softuri si harti”